Bayanin Samfura
● Wannan inji ya dace da samar da 200ml-10L filastik m kayayyakin, yin amfani da mai lankwasa kulle kulle tsarin, low makamashi amfani, tsakiyar kulle, da kulle karfi, sauri sauri, gudu more smoothly.
● Die budewa da tsarin rufewa: musamman tsara don Heng kulle mold inji ta yin amfani da wani babban matsa lamba yanayin kullewa, kulle farantin danniya a tsakiyar samfuri, clamping karfi, bude m kulle samfuri, ko da matsananci m mutu ne kuma Fitted.
● Die shugaban tsarin: duk amfani da 38CRMOALA da sauran kayan, da machining daidai da zafi magani.
● Tsarin na'ura mai aiki da karfin ruwa: cikakken na'ura mai aiki da karfin ruwa mai sarrafa ruwa biyu, sanye take da sanannen nau'in hydraulic bawul da famfo mai, barga, abin dogara.
● Na'urar gefen tashi ta atomatik: ban da na'urar da ke zubar da ruwa tana iya cire samfuran ragowar kayan daidai, kuma tare da nau'in turawa madaidaiciya ban da na'urar ambaliya da nau'in wuka mai jujjuya ban da na'urar da ta cika, fahimtar kayan aikin atomatik ba tare da aikin hannu ba.
Ƙayyadaddun bayanai
Ƙayyadaddun bayanai | SLBU-65 | SLBU-80 |
Kayan abu | PE, PP, EVA, ABS, PS… | PE, PP, EVA, ABS, PS… |
Matsakaicin ƙarfin kwantena (L) | 5 | 10 |
Adadin wadanda suka mutu (Saiti) | 1,2,3,4,6,8 | 1,2,3,4,6,8 |
Fitar (bushewar zagayowar) (pc/hr) | 1000*2 | 950*2 |
Girman Injin (LxWxH) (M) | 4000*2300*2200 | 4600*2600*2600 |
Jimlar nauyi (Ton) | 6.5T | 7.5T |
Rukunin Matsawa | ||
Ƙarfin Ƙarfi (KN) | 65 | 86 |
Buɗewar bugun jini | 220-520 | 300-600 |
Girman Platen (WxH) (MM) | 400*430 | 450*450 |
Matsakaicin girman mold (WxH) (MM) | 460*430 | 500*450 |
Kaurin Mold (MM) | 255-280 | 305-400 |
Ƙungiyar Extruder | ||
Diamita na dunƙule (MM) | 65 | 80 |
Rabo L/D (L/D) | 25 | 25 |
Ƙarfin narkewa (KG/HR) | 70 | 120 |
Yawan yankin dumama (KW) | 15 | 20 |
Ƙarfin dumama (Zone) | 3 | 3 |
Extruder ikon tuki | 15 | 30 |
Mutu kai | ||
Yawan yankin dumama (Yanki) | 2-5 | 2-5 |
Ƙarfin dumama wuta (KW) | 6 | 6 |
Tsakanin tsakiyar mutu biyu (MM) | 130 | 160 |
Tsakanin tsakiya na tri-die (MM) | 110 | 110 |
Tsawon tsakiyar tetra-die (MM) | 100 | 100 |
Tsakanin tsakiya na mutu shida (MM) | 80 | 80 |
Matsakaicin diamita mai mutu-pin (MM) | 180 | 260 |
Ƙarfi | ||
Matsakaicin tuƙi | 18 | 35 |
Jimlar ƙarfi (KW) | 50 | 82 |
Ƙarfin fan don dunƙule (KW) | 2.4 | 3.2 |
Matsin iska (Mpa) | 0.6 | 0.6 |
Amfanin iska (m³/min) | 0.4 | 0.5 |
Matsakaicin amfani da makamashi (KW) | 18 | 22 |